– 3 –
Installing Your Expansion Handset
Follow these three easy steps to get your new handset ready to use:
1Install the battery pack.
2Connect the charger and charge your new handset for 15 hours.
3Register your new handset to the main base.

Step 1: Install the Battery Pack

1Press down on the handset battery case
cover (use the finger indention for a better
grip) and slide the cover downward to
remove.
2Place the battery pack in the battery
compartment with the connectors on the
battery and on the compartment aligned.
3Place the battery case cover back on the
handset and slide it upwards until it clicks
into place.
•Use only the Uniden battery (BT-
0003) supplied with your phone.
Replacement batteries are also
available through the Uniden Parts
Department. (See page 2.)
•Recharge your handset on a regular
basis by returning the handset to
the charger after each phone call.
Rechargeable Ni-MH Batteries
Must Be Recycled or Disposed of Properly
UU893BH_TCX440.fm Page 3 Monday, September 5, 2005 11:49 AM