62. When REGISTRATION COMPLETE. is displayed; the handset has been registered to the base. If REGISTRATION FAILED. appears, please try these steps again.
ELT560
•Remove the battery compartment cover fro m the
bottom of the main base.
•Press and hold the
Registration
button located in the
battery compartment until the base LEDs start
blinking.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8860
TRU8865
•Disconnect the base AC adapter.
•While holding the [find handset], reconnect the AC
Adapter.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8866
TRU8885
•Disconnect the base AC adapter.
•While holding the [flash/find hs], reconnect the AC
Adapter.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8880
•Disconnect the base AC adapter.
•While holding the [find hs/intercom], reconnect the
AC Adapter.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.
MODEL DIRECTIONS: