Uniden TCX930 Compatible Bases, Installing the Accessory Handset, Checking the Package Contents

Compatible Bases

This handset is compatible with Uniden's 5.8 GHz Digital Expandable phone system: the TRU9300 series.

Please visit our website at www.uniden.com for the most up-to- date list of compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See back cover page for contact information.

• Cordless Handset	• Beltclip
• Charging Cradle	• Printed Material
• AC Adapter, model # AD-0005
Input: 120V AC 60 Hz	Output: 9V DC 210 mA

•Rechargeable NiMH Battery Pack, model # BT-909 Capacity: 600 mAh, 3.6V

Installing the Battery

Follow the steps below to install the rechargeable battery pack.

) Using the finger indentation, press in on the battery case cover and slide it down to remove it.

) Plug the battery connector into the battery compartment jack. Be sure to match the red and black wires to the label near the jack.

3) Gently pull on the battery wires. If the

battery connector comes loose, try connecting it again.

4) Replace the battery case cover and slide it up until it clicks into place.

Note: Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone.