Connecting the Base and Charging the Handset
) Connect the AC adapter to the DC IN 9V jack.
CAUTION: To avoid risk of fire and shock, only use the Uniden
2)Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch.
3)Place the handset in the base with the LCD screen facing forward.
4)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.
5)Charge your handset at least 15 to 20 hours before plugging into the phone line.
Connecting the Charger and Charging the Handset
) Connect the AC adapter to the DC IN 9V jack and to a 120V AC outlet that is not controlled by a wall switch.
Caution: Use only the Uniden
2)Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.
3)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.
4)Charge the handset battery pack for at least
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord. 
To AC outlet To DC IN 9V
AC adapter (supplied)
14
