Uniden TRU9465 manual Programming One-Touch Voice Mail Access

Programming One-Touch Voice Mail Access

You can program your voice mail access number to the [] soft key on a station so you can get your messages at the touch of a button. Your voice mail service provider will supply you with the access number. This number may be simply a phone number.

To edit the voice mail number, follow the steps below:

) Press the MENU soft key. Select HANDSET SETUP or BASE SETUP menu, then EDIT VOICE MAIL submenu.

Edit V mail No.

｡

2)	Enter your personal access number (up to 20 digits).
		BACK	OK
3)	If you need to have the phone wait before sending the next digits, press the

PAUSE soft key on the base or [redial/pause] on the handset to insert a two-second pause in the dialing se- quence. For a longer pause, press the key multiple times. A P appears in the display each time you press the key and each pause counts as one digit.

4) Press the OK soft key when you are finished.

Resetting the Voice Message Waiting Indicator (Base Only)

When you receive a new voice mail message, the LED on the top of the handset flashes. In the event your message alert tone gets out of sync with your phone company’s voice messaging system, you can reset back to its original “no messages waiting” state. To reset, follow the steps below:

) Press the MENU soft key. Select the GLOBAL SETUP menu, then the VMWI RESET submenu.

2)Move the cursor to YES.

3)Press the OK soft key. You will hear a confirmation tone.

24