!
DO NOT use an AC outlet controlled by a wall switch.
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Make the AC adapter and the telephone line cord through the hole on the wall mount adapter.
2) Plug the AC adapter into the DC IN 9V jack.
3) Plug the telephone line cord into the TEL LINE jack.
4) Slide the wall mount adapter into the notches on the base.
5) Plug the AC adapter into a standard 120V AC wall
outlet. Hook the cord on the notch of the wall mount adapter.
6) Plug the telephone line cord into the telephone outlet. Hook the cord on the notch of the wall mount adapter.
7) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.
To remove, push up
a tab on the wall
mount adapter as shown.
[ 1 2 ] G E T T I N G S T A R T E D | w w w . u n i d e n . c o m |
