Uniden TRU 8865 owner manual Making and Receiving Calls

Making and Receiving Calls

This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to easily communicate while performing other tasks, such as cooking.

icon appears on the display during hands-free conversations.

note

•To set "Autotalk", see page 23 or to set "Anykey Answer" see

You can easily switch a call from normal conversation to hands-free conversation. To switch a call, press speaker during the call.

6CNM



/76' %9&: 24+8#%;

page 23.

•The handset microphone is located at the bottom of the

	From the Handset		From the Base
	Normal conversation	Hands-free conversation
	Handset On the Cradle		Press speaker.
	Pick up the handset (AutoTalk is:
	on) or pick up the handset and press
To answer a call	talk/flash (AutoTalk is: off).
	Handset Off the Cradle	Handset Off the Cradle
		Press speaker.
	Press any number key, */tone/<, or
	#/> (Any Key Answer), or press
	talk/flash.
	Handset Off the Cradle	Handset Off the Cradle	1) Press speaker.
	1) Press talk/flash.	1) Press speaker.
	2) Listen for the dial tone.	2) Listen for the dial tone.	2) Listen for the dial tone.
To make a call	3) Dial the number.	3) Dial the number.	3) Dial the number.
	OR	OR	OR
	Dial the number, and then press	Dial the number, and then press	Dial the number, and then press
	talk/flash.	speaker.	speaker.
To hang up	Press end or return the handset to the cradle (AutoStandby).		Press speaker.
To enter a pause	When you dial the number in standby mode, press PAUSE soft key. P		When you dial the number in
within the dialing			standby mode, press PAUSE
sequence	appears in the display, which represents a pause.		soft key.

w w w . u n i d e n . c o m

handset (see "Controls and Functions" on page 4). Position yourself as near to the handset as possible and speak clearly.

•If the line is in use by another handset(s), "Line In Use" appears in the display of all registered handset's display that are not in use.

•The base microphone is located under the base (see "Controls and Functions" on page 5). Position yourself as near to the base as possible.

B A S I C S [ 3 1 ]

B A S I C S