Uniden TRUC56 manual Install the battery pack

B. Install the battery pack

Charge the battery pack for at least 3-5 hours before plugging the phone line into your base unit.

1)Press down on the latch and lift the battery cover.

2)Connect the battery pack connector observing the correct polarity (black and red wires) to the jack inside the battery compartment.

Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic connectors will fit together in only one way. Make sure that you have made a good connection.

3)Align the left side of the battery and insert the battery as shown.

4)Insert the tabs of the cover into the slots of the battery compartment and securely close the cover by pressing down.

5)Place the handset in the base with the keypad facing forward.

6)Slide the handset down until it clicks.

BLACK

RED

BLACK noir

RED rouge

1

2

•Use only the Uniden battery (BT-925) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department.

(See page 9.)

•Recharge your phone on a regular basis by returning the handset to the base after each phone call.

GETTING STARTED

G E T T I N G S TA R T E D [ 11 ]