Uniden TRUC56 manual Setting Caller ID Options

Setting Caller ID Options

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. See page 16 for Area Code setup instructions.

AutoTalk allows you to answer the phone without pressing TALK/FLASH. If the phone rings when AutoTalk is On, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not in the base, press any number key, ✱/TONE, or # to answer the call. If you set AutoTalk to Off, you must press TALK/FLASH to answer the call.

Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 40)

You must subscribe to CIDCW from your phone company in order to use this feature. The CW Deluxe is a separate service available through your phone company.

To change your Caller ID options:

1) When the phone is in the standby mode, press MENU/MUTE.

2) Press UP or DOWN to move the pointer to “Caller ID Setup”, then press SELECT/CH.

3) Press UP or DOWN to choose “Auto Talk” or “CIDCW”, then press SELECT/CH.

4) Press UP or DOWN to change the selection.

AutoTalk: “Auto Talk On” or “Auto Talk Off”

CIDCW: “CIDCW On”, “CW Deluxe On” or “CIDCW Off”

5)Press SELECT/CH, and you will hear a confirmation tone.

6)Press END to exit.

GETTING STARTED

G E T T I N G S TA R T E D [ 15 ]