Uniden UBC69XLT manual Scanning the Stored Channels

UB334 Paper OM reduced size.fm Page 26 Friday, September 9, 2005 11:16 AM

2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.

•If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.

4.To program the next channel in sequence, press E/Pgm then repeat Steps 2 and 3.

Searching For and Temporarily Storing Active Frequencies

If you do not have a reference to frequencies in your area, use a search to find a transmission.

Note: When the scanner starts searching, it auto- matically turns on the delay function. To turn delay on or off, press Func + Dly.

Scanning the Stored Channels

To begin scanning channels, press Scan.

The scanner scans through all non-locked channels (See “Locking Out Channels” on Page 33). When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning.

Operation

26