![](/images/new-backgrounds/1237084/23708425x1.webp)
Press [▲] or [▼] to |
|
select the additional |
|
channel you wish to |
|
monitor. Press [ | ] to |
confirm your selection and to activate
Note: Pressing [Function] will stop
SCANNING
This feature allows you to scan for an active channel and communicate with the party transmitting.
1.Press [Function] button until appears in the large display and the auto channel scan icon
[
] flashes.
2.Press [▲] or [▼] to
select up or down.
Note: [▲] means scanning goes from lower to
higher channel, [▼] means scanning goes from higher to lower channel.
3.Press [ ] to confirm your selection and to activate the scan mode. Otherwise the status selected is automatically accepted if no key is pressed after 5 Secs.
10