Uniden UH-052XR manual Programming Ctcss Code, Ctcss Scan Operation

Programming CTCSS Code

1.Select a desired channel to be used with CTCSS.

2.Press and hold [CTCSS] for 1.5 secs. CTCSS icon blinks.

3.Press [▲] or [▼] to select the desired CTCSS code.

4.Press [CTCSS] to save the selected

code. CTCSS icon stops blinking.

NOTE: UH-052XR will return to standby mode after 10 secs. of no activity. CTCSS code can be programmed on every channel. There are 38 available CTCSS tone per channel.

CTCSS

BCL VOX

OS/GS

DUPLOCK

CTCSS

CTCSS Scan Operation

1.Press [SCAN] to start scanning (GS or OS) mode.

2.Press and hold [CTCSS] to change to CTCSS scan mode.

3.During scanning and a signal is sensed on a CTCSS CH, the UH-052XRstops for about 400msecs (decode time) to decode the CTCSS code. If there is no code or the receive code does not match the one programmed on the unit, the unit resumes scanning.

On the example below only radio 1 and 9 can communicate or hear each other because they are using the same or common CTCSS code.

1

CH1 Code 1

CODE 1

CH1

Code 1

9

2

CH1 Code 7

CODE 7

3

CH1

No CTCSS Code

➤Built-in Voice Activated Circuit (VOX) feature enables user to transmit automatically by speaking on the microphone of the VOX headset (not supplied) without pressing the PTT switch.

13