Uniden UH-090 owner manual Open Scan OS Mode, Group Scan GS Mode, Programming Scan Channels

UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)

Operation

Open Scan (OS) Mode

Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel.

This example shows CH40 active.				FM		VOX
						CTCSS
If the received signal ceases, the unit will wait 3 seconds for the signal			SCAN		MEM
to return, otherwise scanning resumes.					BCL		S/RFS/RFVOLV
To skip the active channel, press MEM momentarily. Scanning resumes. To deactivate SCAN, press							SCAN
or the PTT button on the microphone.
	If SCAN is deactivated while on an active
	channel, the UH-090 will stay on that active
NOTE	channel. If no other channels are active, the	NOTE		OS is indicated by the absence of
	UH-090 will reinstate the starting channel.			the GS icon.

Group Scan (GS) Mode

Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p. 11)

To use GS Mode Scanning, press and hold SCAN for 2 seconds. GS icon appears on the display. OS Mode is indicated by the absence of the GS icon.

GS Scanning checks the Instant Priority Channel for activity regularly.

FM

GS

VOX

CTCSS

INST

S/RFS/RF VOL

If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds.

If scanning stops on a channel which is not a Priority Channel, UH-090 will continue monitoring the Priority Channel for activity while listening to the active one. To deactivate SCAN, press the SCAN button or the PTT button.

NOTE

NOTE

If SCAN is deactivated while tuned to an active channel, the UH-090 will stay on that active channel.

If none of the channels are active, the UH-090 will reinstate the Instant Priority Channel

If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.

Rotary		FM
Channel
Selector	SCAN	GS
					S/RF VOL
SLCT	FM/AM	SCAN	MEM	INST	FM SQ
STORE	DUAL	OS/GS	DUP	INST SET	CTCSS

Programming Scan Channels

Select which Scanning Mode you wish to use

-OS or GS (see p. 9). Select the channel you want to store.

NOTE	OS is indicated by the absence of
	the GS icon.

Press MEM to store. MEM icon appears and a short tone beep is heard.

To remove the channel from Memory, press MEM once more. A short beep is heard and

the MEM icon disappears.

Rotary		FM
Channel
Selector	SCAN	GS	MEM
						S/RF VOL
SLCT	FM/AM		SCAN	MEM	INST	FM SQ
STORE	DUAL		OS/GS	DUP	INST SET	CTCSS

9