Uniden UH-090 owner manual Programming the Instant Priority Channel, Recalling the Instant Channel

UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)

Operation

Programming the Instant Priority Channel

Select FM or AM by pressing . . Turn

FM/AM

the Rotary Channel Selector to select the channel you prefer.

Press and hold INST for 2 seconds to store the new setting (you may select one Instant Channel for both FM and AM bands). INST icon appears.

Rotary		FM
Channel		INST
Selector
					S/RF VOL
SLCT	FM/AM	SCAN	MEM	INST	FM SQ
STORE	DUAL	OS/GS	DUP	INST SET	CTCSS

Recalling the Instant Channel

Momentarily press the INST key at any time to return to the Instant Channel.

Dual Band Watch

Select the first channel and band you wish to receive.

Press and hold FM/AM for 2 seconds. DUAL icon appears.

The UH-090 will now continuosly receive this channel and monitor, every 1.5 seconds, the

‘Instant’ Channel on the opposite band.

If a signal is received on this Instant Channel, the UH090 will beep once and flash AM or FM continuously until the signal stops.

Rotary		FM
Channel	DUAL
Selector
					S/RF VOL
SLCT	FM/AM	SCAN	MEM	INST	FM SQ
STORE	DUAL	OS/GS	DUP	INST SET	CTCSS

CTCSS (FM Only)

Select the desired channel to use CTCSS.

Press and hold FM SQ for 2 seconds. CTCSS icon appears.

Turn the Rotary Channel Selector to select the desired CTCSS code. Press FM SQ once to store the new setting.

Channels 05 and 35 are Emergency Channels and channel 11 is a calling channel. CTCSS cannot be selected on these channels.

Rotary		FM		VOX
				CTCSS
Channel
Selector
					S/RF VOL
SLCT	FM/AM	SCAN	MEM	INST	FM SQ
STORE	DUAL	OS/GS	DUP	INST SET	CTCSS

NOTE	If a button is not pressed within 10 seconds the
	UH-090 will automatically exit Select Mode.

11