UNIDEN Model UH044DP DELUXE PACK UHF CB Radio
OPERATION
SCANNING
The UH044 has two types of scanning; Open Scanning (OS) and Group Scanning (GS), OS Scan searches all the channels and frequencies in its memory continuously. GS Scan has the ability of monitoring a priority channel every 1.5 seconds while searching channels and frequencies in its memory.
Scanning allows you to search for active channels programmed in the OS or GS memory.
To initiate scanning, | ||
1. | Assuming the unit is on CH01 when | |
2. | switched on. | |
Press | and scanning starts. | |
| Scan icon flashes during scanning. | |
OPEN SCAN (OS) Mode (the absence of GS icon indicates that the unit is on OS mode)
Allows continuous scanning of channels stored in the Open Scan (OS) memory.
If an active channel is found, scanning will stop on that channel.
The factory has preprogrammed all the 40 UHF channels into the Open Scan channel memory. However, you can change or customise the channels by following the steps on programming Scan Channels on page 17.
Example. CH40 becomes active |
|
|
If the received signal cease, the unit will | ||
wait for at least 3 seconds for the signal to | ||
return, otherwise scanning resumes. |
| |
To skip the active channel, press |
| momentarily. Scanning |
resumes. | or | . |
To deactivate SCAN, press the | ||
|
|
|
15 |
|
|
