UNIDEN Model uh065sx UHF CB Radio

OPERATION

BUSY CHANNEL LOCKOUT

BCL is used when CTCSS or DCS is selected to prevent transmission when the uh065sx detects a transmission from another unit using the same CTCSS or DCS code.

1.Press MENUENT eight times. The current BCL setting flashes.

2.Press or to select desired setting.

3.Press and hold MENU to save and exit.

ENT

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.

However, Roger Beep will not be heard from the speaker.

1. Press

MENU

nine times. The current Roger Beep setting flashes.

ENT

2.Press or to select desired setting.

3.Press and hold MENU to save and exit.

ENT

KEY BEEP

Assures the user that the keypad has been properly pressed by emitting a beep tone. This tone can be switched on or off.

1.Press MENUENT ten times. bP setting flashes.

2.Press or to change selection.

3.Press and hold MENU to save and exit.

ENT

22

uh065sx OM.indd Sec1:22

17/8/07 3:00:34 PM

Page 23
Image 23
Uniden uh065sx-2 Busy Channel Lockout, KEY Beep, However, Roger Beep will not be heard from the speaker, Press