UT01913ZZ_1 11/21/03 5:50 PM Page 14
If SCAN is deactivated while in an active channel, the UH075 will stay on that active channel. If no other channels are active, the UH075 will reinstate the starting channel.
Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press the os/gs key. GS icon appears on the display.
GS Scanning checks the Priority channel activity regularly.
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.
If the Priority channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel the UH075 will continue monitoring the Priority Channel for activity while listening to the active one.
To deactivate SCAN, press the scan or PTT .
If SCAN is deactivated while it is turned to an active channel, the UH075 will stay on that active channel. If none of the channels are active, the UH075 will reinstate the Priority channel.
14
