Uniden UH075 manual To Transmit and Receive, Then disappears on the LCD

UT01913ZZ_1 11/21/03 5:50 PM Page 11

TO TRANSMIT AND RECEIVE

The UH075 uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed at the end of this manual.

1.The maximum RF transmit power of UH075 is 5 watts.

To switch to low power, press 1/5w . LOW appears on the LCD.

To switch back to higher power, press 1/5w again. LOW indicator disappears from the LCD.

2.Before you transmit, listen for activity on the selected channel.

3.When the channel is clear, press and hold the

PTT to transmit. TX appears on the LCD.

Hold the radio with microphone approximately five cms in front of your mouth with the antenna at approximately 45* angle away from your head. Speak in a clear, normal conversational voice.

4. When you have finished speaking, release the PTT and listen for a response. TX indicator

then disappears on the LCD.

The display shows BUSY when a transmission is being received by your radio.

11