UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio

Operation

40 Receive Channels

The uh095sx also has 40 receive only channels (CH41 to CH80) which can be programmed with frequencies ranging from 450-512MHz (in 12.5kHz steps). When programmed they are added to the FM band channels.

If you know the frequency you may store it manually.

Manual Programming

Turn power off. Press and hold MON

 

while turning power back on.

 

The channel indicator flashes the

 

lowest available empty channel. You

 

may use the

or

to select

 

another channel.

 

 

Press

MENU /ENTER . The first digit of the frequency indicator

 

flashes. Press

or

to select first digit.

 

Press

SCAN or

MON

to move left or right between digit positions and press

or

to change digits.

 

 

 

When finished press MENU /ENTER, the channel indictor flashes. Press or

to

select next channel for programming or press and hold MENU /ENTER to store setting. A confirmation tone sounds. The channel is automatically entered into OS scan memory.

Deleting a Programmed Receive Channel

Follow the steps in Manual Programming to enter a frequency for a desired channel.

Select 0 for the first frequency digit and then press MENU /ENTER. Press or to select another channel or press and hold MENU /ENTER to exit programming mode.

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.)

Press

MENU eight times.

Press

or

to display ON.

Press and hold

MENU /ENTER to store

the new setting.

 

If a button is not pressed within 10 seconds the uh095sx will automatically exit the Menu Mode.

12

Page 13
Image 13
Uniden uh095sx manual Receive Channels, Manual Programming, Deleting a Programmed Receive Channel, Roger Beep