Uniden WDECT 2310 quick start Caller ID, N e I t h

UP306EH (WDECT2310) ENG OM 1/21/04 8:53 AM Page 35

CALLER ID

You must subscribe to Caller ID service to use this feature.

When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number in the display before you answer the phone. Additionally, you can dial the displayed number and store the information for memory dialing.

Important:

Memory locations for Caller ID messages and Phonebook locations (including Speed Dials) are common, you can store up to 100 in total. A Caller ID message is not stored when you have stored 100 of the phonebook locations. The earliest Caller ID message is overwritten when you have stored 100 of the phonebook locations and Caller ID messages in total.

•If any of the following occurs during Caller ID operation, the operation will be canceled.

-Press . The phone will return to the standby mode (or the call will be disconnected).

-Press or .

-Receive an outside call or page. -Charge the handset.

•If the handset remains idle for 30 seconds, the phone will return to the standby mode (or back to the call).

1)When the Caller ID message is received, the display shows the caller’s phone number along with the date and time. The incoming call information is stored in

the Caller ID record.	The date and
The current telephone	time received	1 2	/ 1	2 1 2		:	3	0 A M
network in Australia and	Caller’s name	J a n e		S m i t h
New Zealand does not show	Caller’s phone number	0 2	9 5	9 7 9 0		3	5
the caller name.	Soft keys
					MUTE

•If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear.

•When the call is

received via a telephoneCALLERcompany that does not offer Caller ID service, the caller´s phone number does not appear. (This includes some international calls.)

•When the call is via a private branch exchange (PBX), the caller´s phone number may not appear.

ID [ 35 ]