Installing the Battery

Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install the handset battery.

) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2)Plug the battery cable into the battery jack. Be sure to match the red and black wires to the label near the jack. The cable should snap into place. Gently pull on the battery cable. If the battery connector comes lose, try connecting again until the battery snaps into place.

3)Place the battery case cover back on the handset and slide it upwards until it clicks into place.

15

Page 16
Image 16
Uniden WDSS 5335, WDSS 5335 owner manual Installing the Battery