Uniden WDSS 5355+1, WDSS 5355+2 owner manual Programming Base Speed Dial Numbers

Copying Phonebook Entries to Another Handset

If you have more than one handset, you can transfer phonebook entries from one handset to another without having to re-enter names and numbers. You can transfer one phonebook entry at a time or all phonebook entries at once.

1)When the phone is in standby, press [ ].

2)Move the cursor to select COPY, and then press [select/].

3)Move the cursor to select the handset which you want to transfer the entries to and then press [select/].

4)Move the cursor to select ONE MEMORY or ALL MEMORY, and then press [select/].

5)If you select ALL MEMORY, ARE YOU SURE? appears on the display

screen. Move the cursor to select YES, and then press [select/ ].	 %QR[  2JQPGDQQM
6) If you select ONE MEMORY, find the phonebook entry you want to transfer
	 1PG  /GOQT[
and then press [select/ ].	 #NN  /GOQT[ 

7)The phonebook entries will be transferred to the designated handset. During the copy process, the receiving handset shows RECEIVING and the Handset ID of the sending handset.

8)When the transfer is completed, DONE! appears on the handset.

Note: If your phonebook contains seventy entries, you cannot store any new phonebook entries. You will hear a beep, and NOT ENOUGH MEMORY IN RECEIVING UNIT appears on the display. If the selected handset is out of range or data transfer is cancelled, UNAVAILABLE appears in the display. Phonebook listings will not be transferred.

Programming Base Speed Dial Numbers

The base allows you to store up to ten frequently-dialed numbers for speed dialing through the base speakerphone. Each speed dial number may contain up to twenty digits (including pauses). The base speed dial numbers are separate from the handset phonebook entries and must be programmed individually.

To program numbers into the base speed dial memory:

1) With the phone in standby, press [memory] on the base.

24