5.
To set AM, press
#on
the Handset.
To set PM, press #on the Handset.
6.
Press the flash/function key again.
/Vote:
A beep indicates the new time is
programmed, and the
new Time
and Day
Stamp is announced from the Base speaker.
You are then prompted for a PIN code.
7.
Enter the four-digit number you want to use as a PIN code.
8.
Press
flash/function
again.
A beep indicates the new PIN number is programmed.
9.
For example, to set the time to Tuesday at
3:20
PM,
and a PIN code to 1234, press
caller
id, then press
flash/function
followed by these keys.
Reviewing Time and Day Stamp
1.
Press
m
/stop.
The speaker beeps, and the Time and Day Stamp is
announced.
flash/function
flash/function
Setting Your Outgoing Message (OGM)
When you receive a call, the Answering System answers and automatically plays either a preset
message or your personal Outgoing Message.
Preset Messages
The
XCAI680
has two messages programmed in its memory depending on where the
Rec
Time
switch is set.
l
If the switch is either in the
"4"
or “1” position, this preset message plays “Hello. No one is
available to take your call. Please leave a message after the tone.” Incoming messages
are limited to four or one minute respectively.
l
If the switch is set to the left position “ANN” (announce only), this message plays
twice
-
“Hello. No one is available to take your call.” No incoming message will be
recorded.
Note:
If
the
REC
TIME/ANN/4/1
switch is in the
“Announce
Only” position, the Message
Counter LED
displays
an A when the system is
in Standby.
42