Unigreen 50, 40 Standards Of Reference, User’S Instructions, Transporting And Movingthe Machine

This symbol identifies the coupling points of the machine

3.3STANDARDS OF REFERENCE:

-MACHINES DIRECTIVE 98/37/CEE (Ex. Dir.89/392 CE).

-Directive 86/188/CEE: risks deriving from exposure to noise (implemented in Italy by Legislative Decree D.L 277/1991)

-DPR 547/1955: Regulations for the prevention of accidents and hygiene at work.

-Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors.

-UNI EN 292-1/Nov.1992: Machinery safety – Terminology, basic methodology

-UNI EN 292-2/Nov.1992: Machinery safety - Specifications and technical principles.

-UNI EN 294/July 1993: Machinery safety, safe distances to avoid reaching hazardous areas with upper limbs.

-UNI EN 349/June 1994: Machinery safety, minimum spaces to prevent crushing of body parts

-UNI EN 907/Nov.1998: Agricultural and forestry machinery - Sprayers and spreaders of liquid fertilizers - Safety.

-EN 954-1/Dec. 1992: Safety of machinery: Basic concepts, general principles for design.

-UNI EN 982/July 1997: Machinery safety. Safety requisites relevant to systems and their components for hydraulic and pneumatic transmissions. Hydraulics.

-UNI EN 1553 Agricultural machinery - self-propelled, tractor mounted, half- trailed and towed machines. Common safety requisites

-ISO 11684/1995: Pictograms - general principles.

4 USER’S INSTRUCTIONS

	4.1 TRANSPORTING AND MOVINGTHE MACHINE
	If the machine has to be lifted, use suitable slinging and tackle, crane or
	bridge crane, with capacity suitable for the use. The dry weight of the machine
	at the maximum level of fitting and with all the accessories allowed is
	stamped on the nameplate; use slings and lifting gear with a adequate load-
	bearing capacity.
	Don’t stand the sprayer on soft ground or steep slopes.
	Never lift or move the sprayers by hand if there is liquid in the tank. The
	machine will weigh more and the movement of the liquid can change the
	centre of gravity causing uncontrolled movements.
	It is opportune to apply the slinging as in FIG.2 for the MASTER 55 model or
	those equipped with eyebolts. It is necessary to use forklift trucks or transpallets
	with an adequate capacity for other models. The forks should be placed as
FIG. 2	indicated in the specific pictograms.
	Don’t pass or stand under the machine when it is being lifted.
	4.2 DESCRIPTION OF THE MACHINE
	The UMP and MASTER machines are made to be mounted on the floor of the
	pickup vehicle. Some models can be equipped with wheels and handlebar for
	towing by hand or by small tractors.
	The frame is in hot galvanised steel, the cisterns are in easy-to-empty organic
	glass reinforced with glass fibre. Versions are available with the cistern in
	galvanised or stainless steel.
	The pumps are generally membrane and in some cases piston and are coaxially
	mounted with an electric or internal combustion engine reducer.
	They are equipped with an external suction filter that allows easy inspection.
	All the machines are equipped with a hose nozzle for watering and/or washing
	with a length of tubing.
	4.2.1 HAND WASHINGTANKS
	The sprayers are supplied with an auxiliary hand-washing tank with clean
	water and a hand tap.
	This tank must always be supplied with water and the inside must be clean so
	you can wash any parts of the body that come into contact with the chemical
	product used.
	Never drink the liquid inside.

8