Unigreen DSP 11 - 16 - 22 - 32, CAMPO 11 - 16 - 22 - 32 manual V=600xQ

See the table below for the data conversion.

OTHER SPACING (Cm)	75	60	50	45	42,5	40	35	33	30
CONVERSION FACTOR	0,666	0,833	1,000	1,111	1,176	1,250	1,428	1,515	1,666

USEFUL INFORMATION

During the distribution of the product watch the pre-established speed and pressure, following the data in the nozzles table.

The tables indicate the volume distributed per hectare for each type of nozzle at the desired speed and pressure and are calculated as follows:

V=600xQ / IxV	where: V=volume to distribute (L/HA)
	Q=capacity of the nozzle (L/MIN)
	I=distance between the nozzles in metres (0.5)
	V = tractor speed (Km/h)

e)Considering the wear of the nozzles and a possible pressure drop in time, to check them proceed as follows:

With the pump running at the pre-established pressure, measure the quantity of liquid that comes out of the nozzles in L/min. Multiply this by the figure in the table indicated below corresponding to the chosen treatment speed. The resulting figure is the exact quantity of liquid to distribute per hectare.

THIS GOES FOR	Km / hour	2	3	4	5	6	7	8	9	10	11	12
A DISTANCE
		600	400	300	240	200	172	150	133	120	109	100
BETWWEN THE	VALUE
NOZZLESOF0.5m

EXAMPLE: the nozzle delivers 2.2 L. per minute. The speed chosen for the treatment is 6 km/h, the quantity to distribute per hectare is

2.2 x 200 = 440 L/ha

f ) For a quick and immediate spraying check use QUICK CHEK (code 5030/ 0174F )

20unigreen