Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE manual Key to the symbols

Models: LASER-FUTURA- EXPO series AT STD/TOP - AT BASE

1 40
Download 40 pages 6.73 Kb
Page 5
Image 5
Key to the symbols

1

2

3

4

5

6

Key to the symbols

1- Read the Use and Maintenance manual

 

 

 

 

 

 

 

 

 

 

 

 

2- Stop the machine and read the manual before

 

 

 

 

 

 

every intervention

 

 

 

 

 

 

3- Don’t lubricate while running

 

 

 

 

 

 

4- Don’t drink

 

 

 

 

 

 

5- Don’t dispose of residue liquids in the

 

 

 

 

 

 

environment

 

 

 

 

 

 

6- No smoking

7

8

9

10

11

12

7- Danger, risk or injury, don’t get near the

 

 

 

 

 

 

machine until the moving machine members

 

 

 

 

 

 

have stopped

 

 

 

 

 

 

8- Danger of crushing, don’t get your hands near

 

 

 

 

 

 

the moving mechanical machine members

 

 

 

 

 

 

9- Danger, risk or injury caused by fluids under

 

 

 

 

 

 

pressure

 

 

 

 

 

 

10- Don’t climb on the machine during work or

13

14

15

16

17

18

transfers

 

 

 

 

 

 

11- Don’t climb on the tank

 

 

 

 

 

 

12- Don’t enter in the tank

 

 

 

 

 

 

13- Wearing earmuffs is obligatory

 

 

 

 

 

 

14- Wearing a face mask is obligatory

 

 

 

 

 

 

15- Wearing safety footwear is obligatory

 

 

 

 

 

 

16- Wearing protective gloves is obligatory

 

 

 

 

 

 

17- Wearing protective overalls is obligatory

 

 

 

 

 

 

18- Use a working pressure under that indicated

 

 

 

 

 

 

in red on the manometer.

19

20

21

 

22

23

19- Don’t get your hands near the moving cardan

 

shaft

20- Make sure power-takeoff of the tractor turns in the right direction and runs at the right speed. 21- Don’t remove the protecting device with fan moving.

22- Material shooting off the machine, stand at a safe distance.

23- Don’t stand between the machine and the tractor.

2SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used:

Dangerous zones: any zone inside and/or near the machine where the presence of a person exposed constitutes a risk for the safety and health of the same person.

Person exposed: any person who has their body or any part of their body in a dangerous zone.

Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself.

Never start the machine until you have told anyone in the range of action of the machine to move away and they have done so.

The protective devices must not be removed or disabled when the machine is running.

It is obligatory to keep all the plates with danger and safety signs in perfect conditions. If they get damaged or deteriorate, replace them in good time. Replace parts believed to be faulty with others indicated by UNIGREEN. NEVER try makeshift or hazardous solutions.

Don’t wear clothes, jewellery, accessories, or anything else that can get caught in the moving machine members.

Pay the greatest attention to all the warning and danger signs on the machine. Don’t use the machine for any other purpose other than that indicated in the manual.

The machine has been designed and built with the appropriate devices to guarantee the safety of the user.

In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictograms).

FIG.1

da 1 a 18 (P16-P20)

11+12

21+22

923

11+12

da 1 a 18

9

INDICATIVE POSITION OF THE WARNING SIGNS ON THE MISTBLOWERS

NB: the position may vary on the basis of the characteristics of the model.

unigreen 5

Page 5
Image 5
Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE manual Key to the symbols