FIG. 17

P

B

C

 

A

F

WARNING: using the taps on the pump or in any case on the front of the machine puts the operator near the cardan shaft. Despite the presence of CE standard protective covers you should take great care.

H2O

 

This symbol identifies

spa

the clean water tank

 

unigreenby

on the machine used

 

 

 

 

to wash the circuit

3215/0585F

4.13 WASHING THE ATOMISER

After every treatment, thoroughly clean the equipment, washing it with water inside and out. Dirty equipment is very dangerous for people and in particular for children.

Discharging the residues of washing in the environment without taking precautions is forbidden as this pollutes water courses. Distribute the residues on the field or the crops where they won’t cause any damage.

4.13.1 CIRCUIT WASHER ANDTANK WASHER

Some machine models are fitted with a circuit washer tank (FIG.17). This tank must be filled with clean water and used to rinse the entire circuit including the suction, delivery, pump, pressure regulator, jets and nozzles. Thanks to the practical rotary nozzle it also rinses the inside surfaces of the tank.

NB: To completely clean the tank and the pipes of any residues of the various active principles, we recommend adding 2kg of soda to the washing liquid for every 100 L of water.

At the end of the treatment, wash the circuit and the tank.

a)Stop the diaphragm pump disengaging the power-takeoff.

b)Check you have filled the circuit washer tank (C).

c)Make sure the main control of the pressure regulator is OFF and that all the boom sectors are closed.

d)Turn suction deviator A to the circuit washer position (H2O).

e)Start the diaphragm pump by engaging the power-takeoff.

f)Increase the engine speed until all of the liquid in circuit washer tank C has been sucked up.

g)Turn the diaphragm pump off and turn deviator A to the work position (TANK).

h)Turn the main control to ON, so there is pressure in the circuit.

i)Start the diaphragm pump again and use the tank washing tap on the regulator (or on pump P) that supplies jet B.

j)After a few minutes you can close the tank washing tap

k)Distribute the washing residues over a portion of the field where it won’t cause damage.

l)After you have finished washing, stop the diaphragm pump.

NB: at the end of the washing cycle, if there is the risk of frost, pour roughly 500 grams of normal antifreeze for auto vehicles into the tank.

16unigreen

Page 15 Page 17
Page 16
Image 16
Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE manual Washing the Atomiser, Circuit Washer Andtank Washer
Page 15 Page 17

LASER-FUTURA- EXPO series AT STD/TOP - AT BASE specifications

The Unigreen LASER-FUTURA-EXPO series, specifically the models AT STD/TOP and AT BASE, represents a groundbreaking advancement in the realm of agricultural technology. Designed for precision and efficiency, these laser-guided systems are engineered to meet the demands of modern farming practices. The LASER-FUTURA-EXPO series is synonymous with innovation and high performance, offering a range of features and technologies that enhance productivity.

One of the standout characteristics of the AT STD/TOP model is its advanced laser guidance system. This technology allows for unparalleled accuracy in land leveling and grading, ensuring that the soil is prepared perfectly for planting. The integration of top-grade lasers significantly reduces human error and increases operational efficiency. For farmers, this means that crops can be established in an optimized environment, leading to healthier yields.

The AT BASE variant provides a cost-effective solution while still delivering essential laser-fueled functionalities. This model maintains the fundamental technologies of the series but offers a streamlined approach to achieving precision farming. Both models feature durable construction designed to withstand the rigors of outdoor use while providing operators with a user-friendly experience.

A notable technology incorporated into the LASER-FUTURA-EXPO series is its real-time monitoring capabilities. This allows farmers to track their operations seamlessly, making adjustments on-the-fly based on the live data collected. This feature significantly enhances decision-making processes, enabling proactive management of equipment and resources.

The ergonomic design of both the AT STD/TOP and AT BASE models facilitates ease of use, with intuitive controls that allow operators to focus on their tasks without unnecessary distraction. Additionally, maintenance is simplified, ensuring that downtime is minimized and productivity maximized.

In summary, the Unigreen LASER-FUTURA-EXPO series AT STD/TOP and AT BASE models epitomize modern agricultural innovation. With advanced laser guidance, real-time monitoring, and user-friendly design, these systems empower farmers to optimize their operations while promoting sustainable practices. As agriculture continues to evolve, products like the LA-SER-FUTURA-EXPO are at the forefront, enabling a new era of efficiency and productivity in farming.
Top Page Image Contents