Unisar BR112 Introduction, Oral, Rectal, and Axillary underarm Temperature Ranges, Instructions

Introduction

Thank you for purchasing the BébéSounds® 5- Second 3-Way Digital Thermometer. This thermometer will provide you with safe, quick, and accurate temperature readings.

Our thermometer is designed to measure body temperature in three ways – orally, rectally, or under the arm (axillary). It will provide you with an oral or rectal reading in 5 seconds and an axillary reading in 20 seconds. Please keep in mind that body temperatures will differ based on a person’s age and the time of day it is taken. If you are monitoring your child’s temperature, please be sure to use the same method of measurement when comparing several readings.

Important: the use of this thermometer should not replace a visit to your doctor. It is recommended that you advise your doctor any time a temperature is above 100˚F/37.8˚C.

Battery Cover

Mode Button

Display

Protective Cover

On/Off Button

Oral, Rectal, and Axillary (underarm) Temperature Ranges

Normal body temperature varies from person to person and depends on factors such as age, gender, physical activity, environmental temperature, and time of day. Normal oral temperatures may range from 95.9˚F/35.5˚C to 100.4˚F/37.8˚C. An oral temperature can also be as much as 0.9˚F/0.5˚C lower than a rectal reading and 0.9˚F/0.5˚C higher than an axillary reading. Please keep this in mind when monitoring your child’s temperature.

Instructions

Please follow these instructions to insure the most accurate reading possible.

For First Time Use

The first time you use the thermometer press the Mode (M) button to select the method of measurement and the reading in Fahrenheit (F) or Centigrade (C). Be sure to do this before you turn the thermometer on. Each time you press the Mode button a different measurement method will appear on the screen. Stop when the desired method appears. You will only need to follow this step after the first use if you want to change the method of measurement.

How to Use

1.	Remove the protective cover.
2.	Follow the instructions for “First Time Use” ONLY
	if you want to change the measurement method
3.	Press the ON/OFF button (	). You will hear
Thermometer Tip	a beep and the thermometer will self-test for
	about 2 seconds.

2 3