Charging the Battery

Turn the backup battery switch on before charging the battery. Data you entered may not be properly stored until the built-in backup battery has been adequately charged.

1 Press and hold the connector button on the USB charging cable and connect it to the PA600 (1).

2 Plug the AC adapter cable into the power jack on the USB charging cable (2). 3 Connect the AC adapter into an electrical outlet (3).

2 3

1

Using the SD/MMC memory card

1 Remove the four screws from SD compartment cover and remove the cover.

2

Insert the SD card with the notched corner as shown by the icon on the case.

English

Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Page 5
Image 5
Unitech PA600 manual Charging the Battery, Using the SD/MMC memory card