RULES FOR CONNECTOR PIPE INSTALLATION

1. The crimped end of the chimney connector fits inside the furnace flue collar. Install additional chim- ney connectors and elbow with the CRIMPED END TOWARD THE FURNACE. This will allow any condensation in the flue to run back into the furnace. Use 6" dia. steel pipe and elbows for connection to chimney. Never use less than 24 gauge and al- though blued steel is satisfactory, high temp painted black is much more desirable.

2.Slope any horizontal pipe upward toward the chimney at least 1/4 inch for each foot of horizontal run.

3.You must have at least 18 inches of clearance between any horizontal piping and the ceiling. (See Fig. 3)

4.The chimney connector must not extend into the chimney flue. (See Fig. 6)

5.Seal each chimney connector pipe joint with fur- nace cement. Also seal the pipe at the chimney.

6.Use 3 sheet metal screws at each chimney pipe joint to make the piping rigid.

7.The chimney connector may include a section for a barometric draft regulator between the furnace and the chimney (Fig. 4,5, &7). The barometric draft regulator must be installed in the same room (same pressure zone) as the furnace.

8.Install the barometric draft regulator strictly in accordance with the instructions that are provided with the barometric draft regulator.

9.A solid damper must be used in the chimney connecting pipes between the flue collar and the chimney. When used in conjunction with a baromet- ric draft regulator, the solid damper must be placed between the barometric and the chimney. (See Fig. 4,5,7)

Adjusting the Barometric Draft Regula- tor

1.Drill a hole in the chimney connector within 18" of the flue collar below the barometric draft regulator just large enough for the tube of the manometer.

2.Build a fire after all chimney connections have been made.

3.Use a manometer to measure the draft in the flue.

4.Adjust the Barometric Draft Regulator to obtain a draft of 0.05 - 0.06" W.C. under stable fire conditions.

RIGHT WRONG WRONG

Fig. 6

NON-COMBUSTIBLE

INSTALLATION PER

NFPA 211

6" SOLID DAMPER

6" BAROMETRIC

DRAFT REGULATOR

(OPTIONAL)

MEASURE FLUE

DRAFT HERE

Fig. 7

9

Page 9
Image 9
United States Stove 1537G owner manual Rules for Connector Pipe Installation, Adjusting the Barometric Draft Regula- tor

1537G specifications

The United States Stove 1537G is a highly regarded model within the extensive lineup of heating appliances offered by United States Stove Company, a manufacturer with a longstanding reputation for quality and innovation. This model combines efficient heating capabilities with user-friendly features and modern technologies, making it suitable for a variety of home environments.

One of the main features of the 1537G is its impressive heating output. With a robust 30,000 BTU range, this stove can effectively heat spaces of up to 2,000 square feet, making it an excellent choice for medium to large rooms. It operates on both wood and coal, providing users with the flexibility to choose their preferred fuel source based on availability and cost, thus ensuring efficient usage in different conditions.

The stove boasts a large firebox that accommodates longer pieces of wood or coal, which means less frequent refueling. This characteristic is not only convenient but also enhances the stove's overall efficiency, allowing for longer burn times and consistent heat output. The design also features a built-in ash pan that simplifies the cleaning process, promoting ease of use and maintenance.

In terms of technologies, the United States Stove 1537G is equipped with a primary air control system that allows users to regulate the airflow and, consequently, the burning rate of the fuel. This feature not only helps in achieving optimal efficiency but also contributes to a cleaner burn, reducing emissions and soot buildup. The stove's dual-door design provides easy access to the firebox for loading fuel and cleaning.

Additionally, the exterior of the 1537G is constructed from heavy-duty cast iron, which not only enhances durability but also adds a classic aesthetic appeal that complements various home decors. The heating surface is designed to radiate heat evenly throughout the room, ensuring a comfortable and warm environment.

Overall, the United States Stove 1537G is a powerful, efficient, and user-friendly heating solution. With its versatile fuel options, advanced airflow technology, and thoughtful design elements, it stands out as a top choice for homeowners seeking reliable heating solutions that combine tradition with modern functionality. Whether you're looking to save on energy costs or simply enjoy the ambiance of a wood or coal fire, the 1537G is equipped to meet those needs effectively.