SPIN DAMPER

Screw the spin draft onto the 3/8” x 2-1/2” carriage bolt followed by the 3/8”-16 lock nut. Then screw the spin draft and bolt into the Combustion Air Inlet allowing approxi- mately 1/2” of the bolt to stick through into the threaded part of the tube. Secure the bolt in place with the 3/8”-16 lock nut by tightening it against the tube bracket.

(1) Spin Draft

(1)3/8-16 Carriage Bolt

(1)3/8-16 Lock Nut

SPRING HANDLES

Attach the four(4) spring handles to the Feed/Ash Doors, Baffle Rod, and Shaker Rod by twisting the springs counter- clockwise while applying pressure until you have screwed them approximately 3/4”-1” onto the rods.

(4) Spring Handles

7.If not already installed, snap the rocker switch into the top of the junction box.

8.Attach the two longer conduit assemblies to the junc- tion box and to each blower.

9.Provide a 110v power supply and secure it with the cable clamp to the right side of the box. Make all wire connections per the wiring schematic in these instructions using the supplied hardware. Mount the junction box cover.

(2)800 CFM Blower

(2)Gasket, Blower

(8)Tinnerman Clip, 1/4-20

(8)1/4-20 x 3/4 Bolt

(2)Conduit Assembly (5ft)

(1)Honeywell Limit Control

(1)Conduit Assembly (1ft)

(1)Junction Box

(1)Insulation (5” x 5”)

(1)Rocker Switch

(1)Romex Cable Clamp

(1)Fan Center Control

(3)73B Wire Nut

(1)74B Wire Nut

(1)Female Term. (blue)

(1)Female Term. (red)

(8)#10 x 1/2 Screw

DISTRIBUTION BLOWER & ACC.

1.Remove all contents and insure that all components are present for assembly. See the part list below

2.Begin by attaching the blowers to the unit. Insert a clip into each mounting hole in the furnace’s cabinet back. Be sure to install the gasket between the blow- er and cabinet back. Insert the eight bolts provided and tighten.

3.Insert the adjustable snap-disc into the hole in the upper-left hand corner of the cabinet back. Attach using two of the #10 x 1/2 screws provided.

4.Find the Snap-Disc box, the small black box shown on the left side in the illustration. Attach the shorter con- duit assembly to the bottom of the box, securing it with the nut on the fitting.

5.Plug the wires onto the snap-disc (see wiring sche- matic) and then attach the box to the back of the unit using four of the #10 x 1/2 screws provided.

6.Next, mount the junction box and insulation using two of the #10 x 1/2 screws provided. Install the 5 x 5 insu- lation between the cabinet back and junction box, with the foil side to the cabinet back. Attach the con- duit assembly from the snap-disc box to the junction box as shown.

USSC

7

Page 6 Page 8
Page 7
Image 7
United States Stove 1602M installation instructions Spin Damper, Spring Handles, Distribution Blower & ACC
Page 6 Page 8

1602M specifications

The United States Stove 1602M is a highly regarded model in the world of wood and coal stoves, designed to provide efficient heating with a classic aesthetic that complements any home décor. This model is particularly popular among eco-conscious homeowners seeking to reduce their carbon footprint. The stove's robust construction and advanced features make it an excellent choice for those who desire both functionality and reliability.

One of the main features of the United States Stove 1602M is its impressive heating capacity. With a heating area suitable for up to 1,200 square feet, it is perfect for small to medium-sized rooms. The stove’s nominal output of 70,000 BTUs ensures that it can effectively warm up spaces on even the coldest days, providing a cozy environment for the household.

The 1602M employs a traditional front-loading design, which makes fueling the stove straightforward and convenient. It is built with a firebrick-lined interior, which enhances heat retention and promotes efficient combustion. This design feature allows the stove to radiate heat evenly while maximizing the burn time of the fuel used.

One of the standout technologies integrated into this stove is its advanced air wash system, designed to keep the glass door clean and free from soot buildup. This feature allows for an unobstructed view of the flickering flames, enhancing the ambiance of the home. The stove is equipped with an adjustable primary air control, which grants users the ability to regulate the airflow according to their heating needs.

Built with durable cast iron materials, the 1602M is designed to withstand high temperatures while maintaining its structural integrity over time. The classic matte black finish adds to the stove's aesthetic appeal, ensuring it fits seamlessly into various interior styles, from rustic to contemporary.

Safety is also a priority with the United States Stove 1602M. It comes with a built-in safety screen and a thermal safety shut-off feature that prevents overheating. This aspect enhances peace of mind for users, especially in households with children or pets.

In summary, the United States Stove 1602M is a blend of tradition and modern technology, offering efficient heating performance, user-friendly operation, and safety features that make it an outstanding choice for warmth and comfort during the colder months. Its combination of form and function makes it a worthwhile investment for any home.
Top Page Image Contents