Operation

CONTROL PANEL

Turning the furnace OFF/ON, as well as adjustments for the fuel feed rate and room fan speed are performed by pressing the appropriate button(s) on the control panel which is located on the lower left-hand side of your American Harvest furnace.

This unit can be changed between an automatic operation or a manual operation. The controller comes default in the automatic mode.

Pressing the “ON” button on the control panel will begin the start-up sequence for the furnace. Fuel will begin to feed through the auger feed system after 3 minutes. Pressing and holding the “ON” button will rotate the auger continuosly until button is released, which feeds additional fuel.

Pressing the “OFF” button on the control panel will cause the furnace to enter its shut-down sequence. The fuel feed system will stop pulling fuel from the hopper and, once the fire goes out and the furnace cools down, the fans will stop running.

Pressing the “Heat Range” arrows, up or down, will adjust the amount of fuel being delivered to the burnpot.

The draft fan (exhaust) will come on as soon as the “ON” button is pressed. The fan will automatically adjust its speed in accordance to the heat range setting. However, this speed can be manually operated by pressing the “Draft Fan” arrows up or down. “Draft Fan” when pressed, the display will show “Df-A”, which is automatic. Press the arrows again to adjust fan speed. When the furnace is in the manual mode, the optional thermostat will not properly control the unit. When adjusting the Draft Fan setting, try only 1 setting above or below the heat setting.

Heat

Room

Draft

Aux.

Range

Fan

Fan

 

Auto

Manual

The room fan(s) will come on once the unit has reached operating temperature. The room fans will automatically adjust their speed in accordance with the heat range setting. By pressing the “Room Fan” buttons, the display will show “Rf- A” which is automatic or how many fans are running.

The “Aux” button is for Agitator operation. When the unit is “OFF”, pressing the “Aux” arrows will rotate the agitator for easy removal for cleaning. The agitator, when in Automatic mode, will operate at set intervals. However, these can be changed by pressing the arrows on the “Aux” button. The agitator can be adjusted from 0 to 9, setting “0” is off and setting “9” is high.

The “Auger Delay” button can be used to pause rotation of the Auger and Agitator for approx. 1 minute. This can be cancelled by pressing the “ON” button.

The “Mode” button is used to switch between manual and automatic mode. When in auto mode, the fans, auger, and agitator will operate at preset intervals unless changed manually using the buttons mentioned above. When in manual mode, the draft fan (exhuast) will operate at full speed (100%), so the air must be controlled with the damper just below the viewing door.

During normal operation, the unit is constantly monitored for problems. In the event of an error condition, the unit will stop and an error will be displayed. See the list of error codes found at the end of this manual.

USSC

13

Page 13
Image 13
United States Stove 6110 owner manual Control Panel

6110 specifications

The United States Stove 6110 is a highly regarded wood-burning stove known for its efficiency and versatility. Designed to provide both warmth and a welcoming ambiance, this stove is ideal for homeowners seeking a reliable heating solution. Its classic design combines a functional aesthetic with advanced technology, making it a favorite among consumers.

One of the standout features of the United States Stove 6110 is its impressive heat output. With a heating capacity of up to 2,200 square feet, this stove can effectively warm large areas, making it suitable for both living rooms and larger open spaces. It achieves this through a robust firebox that holds a generous amount of wood, allowing for extended burn times and reducing the frequency of refueling.

The stove incorporates a secondary combustion system designed to maximize efficiency. This technology ensures that the gases produced during the burn process are effectively consumed before being released into the atmosphere. As a result, the 6110 demonstrates lower emissions while maximizing heat output—a critical factor for environmentally conscious consumers. Additionally, the unit boasts an EPA certification, affirming its compliance with strict emissions regulations.

Another significant characteristic of the United States Stove 6110 is its construction. Made from high-quality materials, the stove features heavy-duty steel that ensures durability and longevity. The cast iron door is another highlight, providing a classic look while offering a large viewing area to enjoy the beauty of the flames while maintaining heat retention.

The versatility of the 6110 is further enhanced by its adjustable air intake system, which allows users to control the burn rate and heat output according to their needs. This feature not only improves fuel efficiency but also empowers users to customize their heating experience, making it an ideal choice for various climates and personal preferences.

In terms of safety, the stove is equipped with a firebrick-lined interior that enhances heat retention and protects the exterior surfaces from overheating. This ensures that the stove operates safely and efficiently, minimizing the risks associated with wood burning.

Overall, the United States Stove 6110 combines exceptional heating performance, advanced technology, and classic design, making it a standout choice for anyone looking to enhance their home’s warmth and comfort. Whether for a cozy cabin or a family home, this stove promises reliable and efficient heating for many winters to come.