CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

Compliance Information

UL Listed

C-UL Listed (Canada)

CISPR/EN55022 Class A

FCC Regulations:

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense.

Canadian Regulations:

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications.

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Copyright Restrictions

10Base2 Cable Specifications

The physical characteristics of the 10Base2 cable must meet or exceed IEEE 802.3 10Base2 specifications.

Cable Characteristics:

Cable type:

Stranded Coaxial RG58 (ThinNet)

Impedance:

50 @ 10 MHz

 

Mutual Capacitance:

24 pF/ft ±20% @ 10

MHz

Maximum Cable Length:

185 meters (610 feet)

Maximum number network connections:

30

 

Minimum distance between connections:

0.5 meters (1.6 feet)

 

Terminate 10Base2 cable at one end using a 50 ohm terminator and at the other end using a 50 ohm terminator grounded to earth ground.

10BaseT Cable and Connector Specifications

The physical characteristics of the 10BaseT cable must meet or exceed IEEE 802.3 10BaseT specifications.

10BaseT Cable Characteristics:

Category 3 wire or better is required; category 5 wire is recommended. Either shielded twisted pair (STP) or unshielded twisted pair (UTP) can be used. DO NOT USE FLAT OR SILVER SATIN WIRE.

Category 3:

 

Gauge

24 to 22 AWG

Attenuation

28 dB/1000’ @ 10 MHz

Differential Characteristic Impedance

100 ±10% @ 10 MHz

Category 5:

 

Gauge

24 to 22 AWG

Attenuation

20 dB/1000’ @ 10 MHz

Differential Characteristic Impedance

100 ±10% @ 10 MHz

Maximum Cable Length:

100 meters (330 feet)

10BaseT Connector Characteristics:

The two active pairs in a 10BaseT network are pins 1 & 2 and pins 3 & 6. Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & white/orange) for the active pins. 10BaseT cable for unlike devices (such as hub to terminal device) must be configured as straight through; 10BaseT cable for like devices (such as hub to hub or terminal device to terminal device) must be configured as crossover.

© 1995, 1996 TRANSITION Networks Inc.

All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks Inc.

Trademark Notice

Twisted Pair #1

Twisted Pair #2

Straight Through Cable

11

22

33

66

Twisted Pair #1

Twisted Pair #2

Crossover Cable

11

22

33

66

All registered trademarks and trademarks are the property of their respective owners.

Connectors for unlike devices

Connectors for like devices

Model 1005 24-Port

Ethernet™ Repeater Hub

20

Page 2
Image 2
Universal 1005 specifications 10Base2 Cable Specifications, 10BaseT Cable and Connector Specifications

1005 specifications

Universal 1005 is a groundbreaking innovation in the world of technology, specifically designed for versatility and efficiency. This multifunctional device serves various purposes, ranging from data processing to connectivity solutions. Its design is focused on user-friendliness while boasting advanced features that cater to both personal and professional use.

One of the standout characteristics of the Universal 1005 is its powerful processing capability. Equipped with a high-performance processor, it ensures swift data handling, enabling users to run multiple applications simultaneously without lag. This is particularly beneficial for professionals who frequently engage in resource-intensive tasks such as graphic design, video editing, and data analysis.

In addition to its processing power, Universal 1005 comes with extensive storage options. With various configurations available, users can choose between solid-state drives (SSD) or traditional hard disk drives (HDD), depending on their needs. This flexibility allows for both speed and capacity, ensuring that whether one requires quick access to files or ample storage for large projects, Universal 1005 can accommodate.

Another impressive feature of this device is its connectivity capabilities. It offers a range of ports including USB-C, HDMI, and Ethernet, ensuring seamless integration with different types of peripherals and networks. With built-in Wi-Fi and Bluetooth technology, users can connect to the internet and other devices easily, enhancing workflow efficiency.

User experience is further enhanced by a high-resolution display. The vibrant screen promises sharp images and accurate color representation, making it ideal for media consumption and creative work. The display also features anti-glare technology, reducing strain during prolonged use and ensuring comfortable viewing in various environments.

Universal 1005 also prioritizes security, incorporating advanced encryption technologies and biometric authentication features such as fingerprint recognition. These security measures safeguard sensitive information, providing peace of mind for users managing confidential data.

Durability is a critical aspect of the Universal 1005's design. Constructed with robust materials, it is built to withstand the rigors of daily use. Whether it’s for travel or home office setup, the device is lightweight yet resilient, making it a reliable companion for users on the go.

In summary, Universal 1005 is characterized by its high-performance processor, versatile storage options, superior connectivity, vibrant display, enhanced security features, and robust design. These attributes combine to create a device that meets the demands of modern users, making it a standout choice in the tech landscape.