7
The Learning Feature
If your original remotes have functions that this remote doesn’t
have, this remote can learn those functions from your original
remotes. For example, you could learn the Sleep Timer function
from your original TV remote and assign it to the ”Green” key
on this remote.
Before you start:
• Make sure your original remote control is working correctly.
• Make sure neither this remote nor your original remote
control is pointing at your device.
To learn a function:
1. Place both remote controls (this one and your original) on a
at surface. Make sure the ends which you normally point
at your device are facing each other. Keep the remotes at a
distance of 2 to 5 cm.
2. Press and hold down the SET key on this remote until the
(power) key blinks twice (the key will blink once, then
twice).
3. Press 9 7 5 (the key blinks twice).
4. Press the device key on this remote to select the mode to
which you want to copy the learned function (Example:
press the TV key for a function that works with the TV).
5. Press the key on this remote where you want to place the
learned function (Example: ”Green” key). The key will
flash rapidly.
6. Press and hold the key on your original remote that you
want to copy. Hold it down until the key on this remote
blinks twice (Example: “Sleep” key).
7. If you want to copy other functions within the same mode,
simply repeat steps 5 and 6 pressing the next key you want
to copy by learning.
8. To exit the learning mode, press and hold down the SET key
until the key blinks twice.
Important notes:
• Learning is mode specic. To access your learned function,
press the appropriate device key first.
• This remote can learn approximately 25 – 40 functions.
• You can replace a learned function by placing another
learned function on top.
• Upon changing the batteries, your learned functions will be
retained.
To delete a learned function:
1. Press and hold down the SET key until the (power) key
blinks twice (the key blinks once, then twice).
2. Press 9 7 6 (the key blinks twice).
3. Press the device key from which the function will be
deleted.