blink, then the code entry was incorrect. Try steps 2 and 3 again, using the same code.
4.Aim the remote control at the device you want to control. Press the key for that device once (either TV or CBL). If the device turns off, then you have successfully programmed your remote control for that device. If the device does not turn off, then repeat steps 2 through 4 until you have found the code for that device.
5.Repeat steps 1 through 4 above for the next device you want to control (either your television or cable box).
OPERATE YOUR CABLE BOX
Your Polaris Remote Control is now ready to operate your cable box. You can use your remote control to turn your cable box on and off, and to change the channel.
1.To turn on your cable box, press CBL. The CBL key blinks once and your cable box turns on. To turn off your cable box, press CBL. The CBL key blinks once and your cable box turns off.
To change the channel, do the following:
1.Use the remote control's CH+ and CH-
keys to navigate to the channel you wish to view, one channel at a time.
OPERATE YOUR TELEVISION
To turn on your television, press TV. The TV key blinks once and your television turns on. To
www.urcsupport.com
4
