Universal Electronics PVR 5 manual To Unlock All Volume Control Global Volume Unlock

Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 21

4.Repeat steps 1 through 3 (of this section) for each device you want volume to be unlocked.

5.Now, after you select a device that has volume unlocked (e.g., CBL), pressing VOL+, VOL-, or MUTE, will control the device’s volume only in its own mode.

To Unlock All Volume Control

(Global Volume Unlock):

NOTE: Performing these instructions will set independent volume control for all programmed devices.

1. On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

2. Enter 9 - 9 - 3. The last-selected device key will blink twice.

3.Press VOL+ once. The last-selected device key will blink four times.

To Lock Volume Control To One Mode (Global Volume Lock):

NOTE: The audio mode’s volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio device’s volume in all other modes (i.e., AUX, DVD, TV, and CBL).

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

2. Enter 9 - 9 - 3. The last-selected device key will blink twice.

3.Select a mode (e.g., TV) where you want to globally lock the volume controls. The selected device key will blink twice.

4.Now, when you press VOL+, VOL-, or MUTE, the volume of the selected device (e.g., TV) can be controlled regardless of mode.

21