Setting up your devices

Example: to set up the TOTAL CONTROL for your Television:

1Find your device code in the code section (page 15 – 29). Codes are listed by brand name. The most popular

code is listed first. Make sure your television is switched on (not on standby).

2Press and release the TV key on your TOTAL CONTROL.

TV

3Press and hold down the SET key until the red light blinks

twice (the red light will blink once and then twice).

SET

 

4Enter your four-digit code using the number keys.

The red light will blink twice.

_ _ _ _

 

5

Now, aim your TOTAL CONTROL at your television and

POWER

 

press POWER. If your television switches off, your TOTAL-

 

 

 

CONTROL should be ready to control your television.

 

 

 

 

 

 

-If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all.

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-If the original remote control from your Video Recorder did not have a Power key, press PLAY instead of POWER during step 5.

-To set up your other devices, follow the same instructions above, only press the appropriate device key during step 2.

-Remember to press the correct device key before operating your device. Only one device (CD, amplifier, cassette etc.) can be assigned to a device key. If your original remote operates more than one device (for example; a receiver, CD player and cassette player in one remote), you need to set up each device separately.

-Write your code in the boxes provided in the battery compartment and on page 8, for quick, easy reference.

Devices can be found under the following keys:

Television

CD Player /

 

Mini Disk Player

Video Recorder

TV

CD

 

Satellite-

VCR

AUD

Receiver /

 

 

Cable-

 

 

Converter

SAT

DVD

Audio Amplifier /

Tuner /

Miscellaneous Audio

DVD /

Laser Disc /

Cassette Player /

Digital Audio Tape

To set up a second TV, VCR, SAT, CD, AUD or DVD see page 9.

6

Page 7
Image 7
Universal Electronics URC - 4160 instruction manual Setting up your devices