Transport Control Punch Through | Universal Remote Control A6

Transport Control “Punch Through”

This “Punch Through” enables you to program the URC-A6 so that DVD or DVR Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control.

STEP 1: Press and hold the component button you want to add Transport Control to, such as CBL or TV, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.

IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

STEP 2: Press the PLAY button. The component LED light will blink once.

COMPONENT

BUTTONS

SELECT

PLAY

STEP 3: Press either the DVD or DVR button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved.

Page 23

Image 23

Universal Remote Control A6 owner manual Transport Control Punch Through, Component Buttons Select Play

Contents

Remote Control Congratulations Table of Contents Component Buttons Battery InstallationGetting Started Overview Control up to 6 Components Or dial Low Battery WarningCouch Mode Keypad Layout & Button Functions Component Buttons Number PAD Programming URC-A6 using Pre-Programmed CodesPoint the remote control at the component Quick Set-Up Method Quick Set-up Code Tables Component Buttons Select Three-Digit Code Set-Up Method Number Buttons UP5 Arrow DOWN6 Auto-Search Method Please do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls Programming Automated Activities Special Advanced FeaturesMacroPower Total System On/Off Channel UP5 Power Component Buttons You can program up to 20 commands on each Macro button Multi-commands to Macro buttons Mute Button Press the CBL button to select the Cable modeProgramming My Favorites Favorite Channel Buttons Press More Favorite ChannelsControl from. Ex. Cable Device button lights up Now, let’s set--up SimpleSound. Here’s how SimpleSound Total System Volume Control Repeat Steps 1-2 for all other components Component Buttons Select Channel Channel Control Punch Through Component Buttons Select Play Transport Control Punch Through Component Buttons Select Menu OSD On-Screen Display Control Punch ThroughPress the Menu button. The component LED will blink once Press TV Press Input Press Pause Press Stop Input Switching Macros Component Buttons Enter Erasing Commands -- Overview Component Buttons Pause Enter Erasing All Learned Commands from One Component Power System OFF Erasing MacroPower & Other Macro Commands Component Buttons Select Volume Erasing SimpleSound & Other Punch Through Commands Record Factory Reset Component Buttons Select Info Finding a Component’s Set-up Code Number 34-35 Pre-Programmed Code Tables CABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights Who can I contact for more answers? Frequently Asked QuestionsWhat is MacroPower? What if my remote control no longer works from a distance? Specifications USA Limited Warranty StatementPage REV020708 Information To The User Page Page Page OCE-0084ARev