Universal Remote Control A6 Erasing MacroPower & Other Macro Commands, Power System OFF

Erasing MacroPower & Other Macro Commands

STEP 1: To erase MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for two seconds until the current status component LED turns on.

IMPORTANT: If you don’t proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over.

STEP 2: Press the CHANNEL UP button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure.

POWER

ON

SYSTEM

OFF

MUTE

CHANNEL

UP

NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combination with the MUTE button.

Page 28