Universal Remote Control MRF100B manual Welcome, Congratulations

1

PowerBlasterTM

Congratulations!

Congratulations on purchasing Universal Remote Control’s PowerBlasterTM‚ MRF100B!

This changes everything!

When used in combination with PowerBlasterTM, a MasterControlTM RF series remote control (RF10, RF20, RF30) becomes an amazing remote control powerhouse that sends multi-directional RF (Radio Frequency) signals that pass through walls, doors and floors- both indoors and outdoors.

center doors, hide your Components, and still control them with ease. Control outdoor speakers on your patio. Control your Components anywhere!

RF Remotes are ready to go!

One of the best things about this is - nothing has to be done to the remotes themselves for this feature to work. Every time you press a button on one of the MasterControlTM RF series remotes, it sends both a standard IR (Infrared Command) AND an RF (Radio Frequency) signal.

When you install the PowerBlasterTM

through an easy step-by-step process. This Owner’s Manual is designed as a companion refer- ence source to the DVD Setup Guide, should you need to refer back to a particular section, or review certain instruction detail not covered in the DVD. However, if you are unable to watch the DVD Guide for some reason, everything you need to know about setting up PowerBlasterTM is contained in this Manual.

NOTE: PowerBlasterTM is only compatible with Universal Remote Control’s MasterControlTM RF series remote controls (RF10, RF20, RF30). RF series remote control radio signals will not control Components directly.You must have a PowerBlasterTM to receive the RF remote radio signals. Also, Components that came with "no pointing" radio remote controls cannot be operated by an RF series remote unless the Component can be switched to standard IR (Infrared Control) via its internal menus. Some remote control ceiling fans are radio only and cannot be operated by an RF series remote.

2

PowerBlasterTM

WELCOME

PowerBlasterTM sets you free! It enables you to control Components that are completely out-of-sight, up to 100’ away. The PowerBlasterTM picks up RF remote control radio frequency signals from any direction, regardless of distance, so the remote doesn’t need to be pointed directly at any Component. Just imagine - no more pointing! Now you can close your entertainment

kit, it will automatically receive radio signals from RF series remotes and translate them into the infrared commands that control your Components.

Quick Setup DVD Guide makes installation easy!

The Quick Setup DVD Guide will assist you in setting up PowerBlasterTM to work with your RF series remotes by guiding you

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

POWERBLASTERTM Owner’s Manual

© 2006 Universal Remote Control, Inc.

The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS / OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

WELCOME