Universal Remote Control Universl Remote manual Erasing Commands Overview

Erasing Commands – Overview

You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower commands, or re-set the remote to original factory default settings, if desired.

SECTION 1: Erasing a Single Learned Command

STEP 1: To erase a single command, press and hold both the component button and the ENTER (ENT) button together for about 3 seconds until the component LED light turns on.

IMPORTANT: If you don’t press a button within 20 seconds, the LED light will turn off and exit the set-up mode and you will need to start over.

27