Universal Remote Control Universl Remote manual Erasing MacroPower Commands

SECTION 4: Erasing MacroPower Commands

STEP 1: For erasing MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for 3 seconds until the component LED light turns on.

IMPORTANT: If you don’t press a button within 20 seconds, the LED light will turn off and exit the set-up mode and you will need to start over.

STEP 2: Press the CHANNEL UP button to erase and exit the Erase mode. The component LED light will blink three times to confirm the erasure.

31