IMPORTANT SAFETY TIPS

1.Do not install the alarm where it will be exposed to direct sunlight or rain.

2.The alarm siren is very loud. Never put the product close to your ear.

3.The sensor should be directed away from heat sources such as radiators, heating ducts and stoves.

4.If the product goes off at random, it may be located too close to a heat source. Changing the location or direction of the sensor alarm can remedy this.

5.The sensor alarm can provide valuable protection for your home and property if utilized properly. However, this unit cannot guarantee complete protection against burglary or robbery. Therefore, the manufacturer will not be held responsible for any loss or damages which could occur.

INSTALLATION

Battery (FIG. 1)

1.Remove the screw from the battery compartment cover and slide it down to remove.

2.Install a 9 Volt Alkaline battery (not included).

3.Replace the battery compartment cover and screw.

FIG. 1

Wall Mounting (FIG. 2)

Using the battery cover as a template, mark the locations of the holes and install anchors and screws. Place the sensor alarm over the screws and slide the product down to secure in place.

The sensor alarm should be mounted between 3 and 6.5 feet (1 to 2 meters) above the floor for best coverage of the protection area. Adjust the sensor head left or right for the best direction of detection area.

Shelf Top Mounting (FIG. 3)

Turn the sensor head clockwise 180 degrees to the back, then turn the head upwards to the desired angle. Place it on the shelf top location you selected.

AC Adaptor (FIG. 4)

Use only a 9 Volt DC 200 mA AC Adaptor (not included) with a 3.5mm diameter male plug, center positive (+).

FIG. 2

FIG. 3

PROGRAMMING

FIG. 4

 

NOTE: When you first install the battery, the initial security code set by the factory is "0-0-0." You can program your own security code (up to 6 digits). If more than 6 digits are entered, you will hear an error tone.

1.To change an existing code to a new code:

a.Enter the old code number (0-0-0 is factory preset).

b.Press the "PROG" button.

c.Enter your new security code (1 to 6 digits).

d.Press the "PROG" button again.

Page 1 Page 3
Page 2
Image 2
Universal Security Instruments HS-5300 owner manual Important Safety Tips, Installation, Programming
Page 1 Page 3

HS-5300 specifications

The Universal Security Instruments HS-5300 is a prominent product in the realm of home security systems, designed to enhance residential safety and offer peace of mind to homeowners. Known for its user-friendly features, the HS-5300 combines advanced security technologies with a compact form factor, making it an ideal choice for various living environments.

One of the standout features of the HS-5300 is its dual-function capability, serving as both a smoke and carbon monoxide detector. This integration of two essential safety functions ensures that homeowners are alerted not only to fire hazards but also to the presence of potentially lethal carbon monoxide, a colorless and odorless gas that can pose serious health risks. The HS-5300 utilizes high-quality sensors for both functions, providing reliable detection and peace of mind.

The device is equipped with an advanced photoelectric sensor for smoke detection. Photoelectric sensors are known for their ability to detect smoldering fires, which can produce more smoke and less flame than traditional fires, offering an essential layer of early warning. Additionally, the HS-5300 includes an electrochemical sensor for carbon monoxide detection, which is acknowledged for its accuracy and speed in identifying dangerous CO levels.

Another significant characteristic of the HS-5300 is its user-friendly design. The unit features a simple installation process that allows homeowners to set it up quickly, even without prior technical knowledge. The low-profile design ensures it can blend seamlessly with home interiors, ensuring aesthetics are not compromised.

The HS-5300 also comes with a built-in test button, enabling users to easily check the functionality of the unit and ensure it is working as intended. This feature promotes regular maintenance, which is vital for any safety device in a home.

In conclusion, the Universal Security Instruments HS-5300 stands out in the market due to its dual functionality, advanced sensing technologies, and user-friendly characteristics. By providing reliable smoke and carbon monoxide detection within a compact design, the HS-5300 positions itself as a valuable investment in home safety, protecting not only property but also the well-being of occupants. Its combination of essential safety features ensures that it meets the demands of today’s homeowners, solidifying its role as a critical component of any comprehensive home security system.
Top Page Image Contents