Basic Operations
English
●Adjusting the treble
This adjustment can be performed only when the
Select “TREBLE”. | |||||
Press the [ |
|
|
| ] button. | |
|
| ||||
|
| ||||
Press the [x] or [v] button to select as | |||||
| following order. | ||||
| “T<G 0>” ↔ “T<F 10k>” | ||||
Turn the [ROTARY] knob to adjust the | |||||
| gain, the F (center frequency) and the Q. |
T<G 0> : The factory default setting is “0”. (Adjustment range: +7 to
T<F 10k>: The factory default setting is “10k”.
(Adjustment range: 10k/12.5k/ 15k/17.5k)
●Adjusting the non fader output
volume
You can adjust the volume output from the unit’s non fader output terminal.
∗The factory default setting is “0”. (Adjustment range: +6 to
Note:
•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.
●Adjusting the balance
∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))
●Adjusting the fader
∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))
Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.
∗The factory default setting is “OFF” (off).
1.Press and hold the [SOUND] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect.
2.Press and hold the [SOUND] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect.
14 DB285USB