Univex DB285USB 18

CD/MP3/WMA Operations

Disc-In-Play function

Loading a CD

English

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

CAUTION

•Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

•Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup Eject function

Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on.

1.Press the [Q] button. Remove the disc after it is ejected.

Notes:

•If you force a CD into before auto reloading, this can damage the CD.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/MP3/ WMA mode.

When the unit enters the CD/MP3/WMA mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

The mode changes each time the [SRC] button is pressed.

Radio ➜ CD/MP3/WMA ➜ USB ➜ AUX ➜

Radio ...

1.Insert a CD into the centre of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts.

Notes:

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.