♦Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
♦TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣The 
+, 
- and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
➣When "TV Speaker" is set to "Off", you can operate only “Sound Select” (in PIP mode) in Sound menu.
♦Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. − Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the TOOLS menu. |
|
|
| |
| Tools |
| ||
When you set to "Dual | Picture Mode | : Standard |
| |
displayed on the screen. | Sound Mode | : Custom |
| |
|
| Sleep Timer | : Off |
|
1. | Press the TOOLS button on the remote control. | SRS TS XT | : Off |
|
Energy Saving | : Off |
| ||
2. | Press the ▲ or ▼ button to select “Dual | Dual | ◄ Mono | ► |
3.Press the ◄ or ► button to select required option.
4.Press the ENTER
button.
| Audio Type | Dual 1/2 | Default |
|
|
|
A2 | Mono | MONO | Automatic | Move | Adjust | Exit |
Stereo | STEREO ↔ MONO | change |
|
|
| |
Stereo |
|
|
| |||
Dual | DUAL 1 ↔ DUAL 2 | DUAL 1 |
|
|
| |
|
|
|
| |||
| Mono | MONO | Automatic |
|
|
|
NICAM | Stereo | MONO ↔ STEREO | change |
|
|
|
Stereo | Dual | MONO ↔ DUAL 1 | DUAL 1 |
|
|
|
| DUAL 2 |
|
|
| ||
|
|
|
|
|
|
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode.
English - 22
