CAUTION-PLEASE READ

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury.

2. Do not allow minors or children to play on or around this equipment.

3. Exercise with care to avoid injury.

4. Consult your physician before beginning any exercise program.

WARRANTY INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

 

10YEARS

 

 

 

5YEARS

 

 

1YEAR

90 DAYS

Structural Frame

 

 

 

Pillow Blocks, Pulleys,

Belts and Grips

Upholstery and Any Items

(Not Coatings)

 

Weight Plates, and Guide Rods

 

 

Not Specified

 

 

 

 

 

 

 

 

CONTACT INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

United States, Canada,

 

 

Europe, Africa, Middle East

Asia Pacific

United Kingdom

LatinAmerica

 

 

(+31) 180.646666

 

 

(+852)2891.6677

+44(0)1353.666017

800.634.8637

 

 

 

 

 

 

 

 

 

 

 

 

 

VISIT US AT:

HAMMERSTRENGTH.COM

 

 

847.288.3399

 

 

 

 

 

 

 

 

 

 

PREVENTATIVE MAINTENANCE TIPS

 

Action

 

 

DAILY

WEEKLY

 

QUARTERLY

BI-ANNUALLY

AS NEEDED

 

 

CLEAN

 

 

 

 

 

 

 

 

 

 

 

Upholstery

 

 

X

 

 

 

 

 

 

 

 

Guide Rods

 

 

 

 

 

 

 

X

 

 

Hand Grips

 

 

 

 

 

 

 

 

X

 

 

INSPECT

 

 

 

 

 

 

 

 

 

 

 

Visual Overall

X

 

 

 

 

 

 

 

 

Cables

 

 

 

X

 

 

 

 

 

 

 

Hardware

 

 

 

 

 

 

X

 

 

 

 

Frame

 

 

 

 

 

 

 

X

 

 

 

Hand Grips

 

 

 

 

 

 

 

 

X

 

 

LUBRICATE

 

 

 

 

 

 

 

 

 

 

 

Guide Rods

 

 

 

 

 

 

 

X

 

Clean:

Upholstery with mild soap and water.

Guide rods with a cotton cloth.

Hand grips with mild soap and water.

Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative.

Inspect:

Cables for wear or damage and proper tension (should not exceed 3/4” deflection.) Pay close attention at bends and attachment points.

Hardware should be checked for looseness. Tighten as required.

Frames should be inspected for wear or damage.

Hand Grips should be checked for wear or damage

Lubricate:

Lube the Guide Rods. Apply the lubricant to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. Do not spray lubricant directly on the Guide Rods.

10

Page 10
Image 10
Univex OHDADJ manual Preventative Maintenance Tips