7. OPERATIONS
Basic Operations | Note: Be sure to read this chapter referring to the front diagrams of |
chapter “2. CONTROLS” on page 3 (unfold). |
English
!CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Turning on/off the power
Note:
Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too much, you may not be able to start the engine and this can reduce the service life of the battery.
1.Press the [SRC] button.
2.The illumination of the display on the unit light up. The unit automatically remembers its last Operation mode and will automatically switch to display that mode.
3.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Selecting a mode
1.Press the [SRC] button to change the Opera- tion mode.
2.Each time you press the [SRC] button, the Op- eration mode changes in the following order:
Radio mode | CD mode | (USB mode) |
AUX mode | Radio mode... |
The
Radio mode : | , | , | , | |
CD mode | : |
|
|
|
USB mode | : |
|
|
|
AUX mode | : |
|
|
|
Notes:
If the CD mode is selected when no disc is inserted, the display shows “NO DISC”.
If no USB drive is inserted, USB mode will not be displayed.
Switching the display
1.Press the [DISP] button to select the desired display.
2.Each time you press the [DISP] button, the display switches in the following order:
Radio/CD
Main display Clock display Main display
MP3/WMA (Disc and USB) Mode:
Title Display Clock Display
∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.
Adjusting the volume
Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
"VOLUME:XX" will be shown in the display while “VXX” will be displayed in the message knob indication where“XX” is the volume level from 0 (minimum) to 33 (maximum).
∗The factory default setting for volume is "17".
Displaying additional buttons
1.Push the [PUSH OPEN] cover to open the flip down cover that consists of the following buttons:
[DIRECT]
[BAND]
[ADJ]
[ISR]
UDB275MP 11