Univex UDB275MP Radio Operations

Radio Operations

English		mode, then the radio will be on.
	Listening to the radio
	1.	Press the [SRC] button and select the Radio
	2.	To select a preset band, press the [BAND]
		button, then select one of the preset bands
		such as FM1, FM2, FM3 or AM. Every time
		the [BAND] button is pressed, the display will
		change as:
		FM1 FM2 FM3		AM FM1...
	3.	Press the [	,	] button to tune in the
		desired station.

Seek tuning

1Press the [BAND] button and select the desired band (FM or AM).

∗ If		is not lit in the display, press and hold
the BAND] button for 1 second or longer.
in the display goes off and seek tuning
now available.
2. Press the [			,			] button to start automatic
station tuning.
When the	[			]	button is pressed, search
will be performing in the direction of higher
frequencies. When the [							] button is pressed,

search will be performed in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step Tuning mode, the frequency changes one step at a time. In the quick Tuning mode, you can quickly tune the desired frequency.

1.Press the [BAND] button and select the desired band (FM or AM).

∗ If	is not lit in the display, press and hold
the BAND] button for 1 second or longer.
	is lit in the display and manual tuning is
now available.
2. Tune into a station.
Quick tuning:		[			] button for 1 second
Press and hold the				,
or longer to begin station tuning.
Step tuning:
Press the [	,		]	button to perform manual
tuning.

Preset memory function

Preset memory function can store up to 24 stations:

six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1.Press the [BAND] button, to select a band you want to store in the memory.

2. Press the [	,	] button to tune into a desired
station.

3.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.

1.Press the [BAND] button and select the desired band (FM or AM).

2. Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

1.Press the [ ] button.

2.When a desired station is tuned in, press the

[ ] button again to continue receiving that station.

Note:	] button
Be careful not to press and hold the [

for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing sta- tions.

14 UDB275MP