CONTROLS
1. Power button (POWER)
2. Channel/Frequency select button (CH/FREQ)
3. Display (MULTI-FUNCTION DISPLAY)
4. Band select button (BAND)
5. Tuning button (DOWN TUNING UP)
6. Preset tuning buttons (PRESET)
7. Direct-in button (DIRECT IN)
8. Memory button (MEMORY)
9. Scan level button (SCAN LEVEL)
10. Automatic/Manual tuning select button
(AUTO/MANUAL)
LISTENING TO THE RADIO
Preparation
1. Press the POWER button on the tuner.
FREQUENCY UP/DOWN TUNING
Automatic tuning
Manual tuning
1. Press the BAND button to select AM or FM.
2. Press the CH/FREQ button to select the frequency
mode. "FREQ" appears.
3. Press the AUTO/MANUAL button to select the automatic
tuning mode. "AUTO" appears.
4. Press the SCAN LEVEL button to select the desired
scanning level, "SCAN 1" or "SCAN 2."
SCAN 1: To receive stations with weak signals
SCAN 2: To receive stations with strong signals
5. Press the TUNING "UP" or "DOWN" button.
The unit will scan up or down the band and receive the
next station with a signal that is at least as strong as the
scanning level selected in step 4.
6. Adjust for the desired sound quality with the appropriate
controls of the connected amplifier.
1. Press the BAND button to select AM or FM.
2. Press the CH/FREQ button to select the frequency
mode. "FREQ" appears.
3. Press the AUTO/MANUAL button to select the manual
tuning mode. ("AUTO" disappears and "MONO" appears
when FM band is selected.)
4. Press and hold the TUNING "UP" or "DOWN" button
until the desired station frequency appears on the
display.
- Press and release the TUNING "UP" or "DOWN"
repeatedly change the selected frequency one step
at a time.
-3-